Tag: damage

I picked up a piece of 4’x’8’x1/8″ Masonite (hardboard) from Lowe’s today. A 4’x8′ sheet of hardboard is enough to do all four panels and then some. About $7.

I’m going to use this to repair my driver-side door panel, which has a warped and torn and decayed backing, but still has some vinyl with a few years left (maybe). So first, I’m going to separate the vinyl from the hardboard, and use the hardboard for a template to cut out the new door panel.

There’s the vinyl, then there’s a trim piece (like beading) that goes around the perimeter. There are staples all around the perimeter holding on the beading, but the staples don’t go completely through the door panel. They’re not bent like normal staples — just stuck in a little.

Because my panel’s hardboard backing is in pieces (and some pieces are missing), I have to re-assemble it. But it’s also warped badly, so I’m going to try to flatten it before I try to put the pieces together. My approach is to wet the hardboard, and lay it out flat with some heavy weight stacked on top. At the Vanagonauts website someone name Chris talks about this very thing.

There are only three cuts to be made — the rectangular pocket opening, and the two circles for the window crank and door latch handle. Then, I will need to drill the holes around the edge of the backing (and NOT through the vinyl, of course) for the press-in fasteners that hold the panel to the door itself.